English
한국어
Product Consultation
Your email address will not be published. Required fields are marked *
1. Regular flushing: Regular flushing of the Foam Dispenser Pump will help prevent soap residue and impurities from building up inside the pump. When you change the liquid soap, you can first rinse the pump parts with warm water to ensure all soap residue is removed. This avoids clogging or reducing the effectiveness of the pump.
2. Decomposition and cleaning: Regular decomposition and cleaning of Foam Dispenser Pump can completely remove the dirt and residues in the pump. Carefully disassemble the pump head, pump body, and other components following the manufacturer's instructions. Soak the parts in mild soapy water for some time, then gently scrub with a soft brush to ensure a thorough clean.
3. Avoid cross-contamination: When operating the Foam Dispenser Pump, try to avoid direct contact with pump parts, especially as your hands may not be clean. Use clean hands or paper towels to operate the pump, which reduces the spread of germs and contaminants.
4. Follow the instructions for use: The manufacturer of the pump usually provides detailed instructions for use and maintenance guidelines. Read and follow these instructions to ensure you perform maintenance procedures correctly and to avoid damage to the pump due to incorrect handling.
5. Avoid Viscous Liquids: The Foam Dispenser Pump is designed to dispense foamy liquids, if you add liquids that are too viscous to the pump, it may cause clogging or damage to the pump components. When choosing a liquid soap, make sure it is suitable for the design of the pump.
6. Regularly replace the pump head: Replace the pump head of the Foam Dispenser Pump regularly according to the manufacturer's recommendations. Prolonged use will cause the pump head to wear, which will affect the distribution of foam. Regular replacement of pump heads ensures quality and hygienic foam distribution.
7. Avoid using chemical cleaners: Avoid using strong acid, strong alkali or other chemical cleaners to clean the pump, because these substances may damage the material of the pump and affect its performance.
8. KEEP DRY: After cleaning, make sure all pump parts are sufficiently dry before reassembling. Humid conditions can lead to bacterial growth or corrosion of metal parts.
9. Regularly check the seals: Regularly check the sealing parts of the Foam Dispenser Pump to make sure they are not worn or damaged. A broken seal can cause the pump to leak.
10. Avoid extreme temperatures: Try to avoid exposing the pump to extreme high or low temperatures. Extreme temperatures may affect the performance of pump components, leading to pump failure.
Cosmetic packaging foam pump for plastic bottles
Cosmetic packaging foam pump for plastic bottles
Performance characteristics:
(1)After assembling and cooperating with the bottle filled with water, prevent liquid leakage；
(2)Good sealing, uniform spray volume, good exhaust function, safety in line with quality standards.
Product Features:
The product starts the pump smoothly, fast liquid,.
Good sealing, no water leakage.
The color is selected according to the customer.
Spray evenly, good effect.
