1. Check the nozzle:
When a nozzle is clogged, the first thing to do is to check the nozzle itself. Observe whether there are obvious foreign objects in the nozzle hole, such as dust, residue or particles. These substances may clog the nozzle holes, causing the spray to be uneven or completely unable to spray. Therefore, by carefully inspecting the nozzle, the location and extent of the blockage can be determined, providing a basis for subsequent cleaning work.

2. Clean the nozzle:
Once you've identified where the nozzle is clogged, you can start cleaning it. Using a fine needle or toothpick to gently pick out the clog is an effective method. However, during the cleaning process, special attention should be paid not to use excessive force to avoid damaging the nozzle structure. Gently stir and gradually remove the blockage until the nozzle hole is clear again.

3. Soaking and cleaning:
If simple cleaning doesn't completely remove the clog, try soaking it. Soaking the shower head in warm water for a few minutes can help soften or dissolve some stubborn clogs. At the same time, you can use a soft cloth or toothbrush to gently wipe the surface of the nozzle to remove any residue attached to it. After soaking and cleaning, rinse with clean water to ensure that the nozzle is clean and free of residue.

4. Use cleaning agent:
For more severe clogs, consider using a specialized cleaner or white vinegar. Mix cleaning agent or white vinegar with water in a certain proportion, then soak the nozzle in the mixture for a few minutes. The ingredients in cleaning agents or white vinegar can effectively dissolve or break down the blockage, making the nozzle clear again. After soaking, rinse with clean water and dry the nozzle with a soft cloth to ensure there is no residue.

5. Check the watering can:
If the nozzle is still clogged after cleaning, there may be a problem inside the watering can. Check whether there is any sediment or residue inside the watering can. These substances may enter the interior of the nozzle through the nozzle hole and cause blockage. If you find foreign matter inside the watering can, you can use detergent or white vinegar to clean it. Pour cleaning agent or white vinegar into a spray bottle and shake for a few minutes to allow the cleaning solution to fully contact the inner wall. Then pour out the cleaning solution and rinse it with clean water to ensure that there is no residue inside the spray bottle.

6. Tap lightly:
After cleaning and soaking, if the spray head is still clogged, try gently tapping the watering can and spray head. This helps loosen the clog inside the sprinkler head, making it easier to remove. However, during the tapping process, you must pay moderate attention to avoid damaging the nozzle or watering can due to excessive force. After tapping lightly several times, try using the nozzle again to see if it can spray normally.

7. Replace the nozzle:
If none of the above methods can solve the blockage problem, the nozzle may be damaged or aged. In this case, it is a wise choice to consider purchasing a new sprinkler head for replacement. The new nozzle has better performance and longer service life, ensuring stable and reliable spray effects. When purchasing, choose a nozzle model that matches the watering can to ensure smooth installation and use.

9. Preventive measures:
In order to avoid nozzle clogging problems, some precautions need to be taken. First, make sure the liquid in the spray bottle is clean and free of impurities before use. If the liquid contains particles or sediment, it may cause the nozzle to become clogged. Secondly, clean the nozzle regularly, especially after it has not been used for a long time. This removes residue attached to the nozzle and keeps it clear. Additionally, avoid exposing the sprinkler head to extreme temperatures or chemicals to prevent damage and aging. Through these preventive measures, the occurrence of nozzle clogging problems can be effectively reduced.

Mist Spray Nozzle Pump PP Plastic Trigger Sprayer

Features:
Environmentally friendly material: Made of environmentally friendly PP material, it does not contain harmful substances, is safe and non-toxic, can be used safely, and can also be recycled, which is in line with the concept of environmental protection.
Hollow cone design: unique design, beautiful appearance, comfortable hand feeling when using, conforms to ergonomic principles, and is more convenient to operate.
Spray nozzle pump: Designed with a spray nozzle pump, the spray is uniform and fine, and the spray volume is large, which can quickly cover a large area.
Trigger design: With the trigger design, the spray can be sprayed by pressing the trigger, which is convenient and practical without complicated operations.